Description of item
The pop vamp (remote control type) for men appeared from the popular Nomitang (Nomitan) brand!
Spotty RC is a prosthetic anal vibe with remote control that provides an exciting way to enjoy. A German product designer has been designed to maximize the innovative form based on ergonomics, ease of holding, a fit when inserting an anal. As an anal vibe to swing, it features a compact body. Black mat material, soft touch made of smooth silicon. The head part slowly and powerfully swings and stimulates the prostate gland called male's G spot. In addition to the swing movement of the head part, Spotty also has a vibration vibrator that stimulates the perineum. (Swing 3 pattern, vibration 5 pattern) Also features a powerful swing that does not stop easily even if you hold it gently! Also achieves outstanding quietness!
■ 3 stages of rotation speed
■ 5 stages of vibration mode
■ depth 1 meter of water resistance ■ With remote control (
included battery for checking operation of button battery CR2032)
■ Remote control (within 5 meters)
■ USB rechargeable type (operating for about 1 to 3 hours with 2.5 hours full charge)
■ Travel lock With function
Contents / Accessories
Body, remote control (button battery included for operation check), charging USB cable, Japanese manual
Material · Ingredients
High grade silicon, ABS
Size / Weight
Body: Head part diameter 34 mm, insertable part 100 mm, perineal part vibes 60 mm, main body weight 157 g, remote control weight 30 g
Exterior: height 180 mm × width 180 mm × depth 55 mm, weight (including boxes and accessories) 446 g
· When using for the first time or when not using for a long time, please be sure to charge before using.
· Please note that incorrect usage may cause unexpected accidents.
· Do not apply strong shocks, such as stepping on the body or dropping it, as it may cause a malfunction.
· Please stop using it immediately when you feel abnormal while using.
· Product design and specifications are subject to change without notice due to improvements etc.
· This product is for adults. We refuse to use underage minor strictly.
· We can not assume any responsibility for problems caused by accident, abuse, misuse, damage.
· When charging, please use the dedicated charging USB cable supplied with this product.
· When using for the first time after opening, please be sure to fully charge it before use.
· Please stop charging this product in wet condition. Please be sure to charge before charging.
· Please do not leave it in a state of charging for a long time.
· Because this product is imported to the country through long distance transport from overseas, some dirt and scratches etc. are seen in the package, but because there is no defect in the product itself, so please acknowledge it again so Please give me.
· Do not let the remote controller get wet with water.
· It is possible to wash directly after use, but please wipe off moisture well and store after washing is finished.
how to use
■ Operation of the main body only
(1) After releasing the travel lock of the main body, when pressing each button, the LED light built in the button lights up, and at the same time the vibration starts.
(2) When you want to stop, when you press and hold each button for a long time, the LED light turns off and vibrations stop.
(3) Each time you click each button briefly, the rotation pattern and vibration pattern change.
■ Operation with Remote Controller In
order to prevent deterioration of the battery, an insulating chip for preventing current flow is inserted between the battery and the electrode, so please take it when using.
(1) After releasing the travel lock of the main body, press the [NT] button on the remote control to start the vibration. (Different rotation / vibration combination)
(2) Each time you press the 【NT】 button, the rotation / vibration pattern changes.
(3) Use the ▲ ▼ buttons to adjust the strength of rotation / vibration.
(4) When you want to stop, press and hold the 【NT】 button to stop.
About travel lock
«Lock» When two buttons on the main body are pressed at the same time, the LED light built in the button part will light up. Touch and hold this LED light until it goes out, travel lock will be applied.
«Unlock» When you press two buttons on the main unit at the same time, the LED light built into the button is lit only on one side. Please long press until the other LED light turns on. Please release your finger quickly when the two LED lights are on. Travel lock is now released.
Vibration pattern · power supply
■ Three stages of rotation speed, five stages of vibration mode
■ Charging method
Charges with the included USB charging cable. Insert the connector plug of the USB charging cable into the small charging hole near the handle of the main unit. When inserting the connector plug please insert so that it is perpendicular to the surface of silicon. The other USB connector connects to the USB port of the personal computer or the commercially available USB conversion connector and charges it. The red LED lamp blinks while charging. When charging is completed, the LED lamp goes out.
It is fully charged in 2.5 hours and continuous operation is possible for about 1 to 3 hours.
(Caution 1) Please be careful not to get it wet with water while charging.
(Note 2) Traveling will automatically take place after charging.
■ Replacing the battery of the remote controller Remove the
silicone cover on the back side and push the silver clip part firmly in the direction of the arrow to disengage the button battery. When inserting button batteries, please press until you hear a click.
Types of button batteries · · · CR 2032